2. Check the fuses to see if both low beam lights are on the same fuse. Many cars have one fuse for low beam and another for high beam, so both lights out at the same time typically means fuse blown. 3. If the headlights are OK and the fuses are OK, then the problem is *LIKELY* the headlight switch. In my case, AutoZone has one and it can be The last output consist of the end of output code 3333. Clearing Trouble Codes. To erase any diagnostic codes, disconnect battery ground cable for 15 seconds and the ECM (ECU) memory will be erased. Hyundai OBD Diagnostic Computer Codes. If codes other than these are indicated, repeat self-diagnosis.

With a genuine Hyundai sensor the output is normally high (11~12V). Now place something metallic close to the face of the sensor and the signal voltage should switch low (approx 0V). Move the metal away from the sensor and the voltage should switch high again. I did this test and behaves exactly as you describe.

What is the Cost to Diagnose the Code P1693 Chevrolet? Labor: 1.0. The cost to diagnose the P1693 Chevrolet code is 1.0 hour of labor. The diagnosis time and labor rates at auto repair shops vary depending on the location, make and model of the vehicle, and even the engine type. Most auto repair shops charge between $75 and $150 per hour. hi scott have a 2010 kia ceed crdi with intermittent non start.read codes from immobiliser and got p1693 and p1696 kia dealer have replaced immobiliser antenna but fault back after 2 weeks same codes.Back at dealers now but they say car wont fail to start suggest we have it back and return when fault reappears
P1115. Engine Coolant Temperature Signal from ECM to TCM. P1121. Throttle Position Sensor Signal Malfunction from ECM to TCM. P1170. Front Heated Oxygen Sensor Stuck. P1195. EGR Pressure Sensor (1.6L) or Boost Sensor (1.8L) Open or Short. P1196.
69Vz. 254 358 181 265 97 388 25 249 407

hyundai getz fault code p1693